Deerskin Leather Lace Spool 1/8" x 50 Ft Lacing 13 Colors Crafts Cord Jewelry, White Review (2026)

What this lace is made from

This spool holds 50 feet of deerskin lace cut to a 1/8 inch width, sold here in white but part of a line offered in 13 colors. Deerskin lace runs about 2 ounces, or roughly 0.8mm thick, which is noticeably thinner and softer than the cowhide lace many kits ship with. Deer hide has long, tightly packed fibers that give it a natural strength well beyond its thin profile, which is why it has been used for centuries in Native style garment lacing, moccasin construction and pouches. The 50 foot length on one spool is enough for several smaller laced projects, or one larger item like a laced bag flap or a set of moccasins, without needing to piece together shorter lengths mid-project.

Why deerskin behaves differently from cowhide lace

The main reason crafters reach for deerskin lace over cheaper cowhide lace is how it handles at the moment of pulling a stitch tight. Deerskin is soft and pliable with minimal stretch, so it can be pulled firmly around an edge for whipstitching without cracking or splitting the way a stiffer, drier lace sometimes does at sharp corners. That softness also makes it comfortable to work with for long stretches, since it does not fight the hands the way a stiffer lace can. The trade off is that deerskin is not as abrasion resistant as a heavier latigo or kangaroo lace, so it suits decorative lacing, jewelry cord and light duty projects more than lacing that will see hard daily wear, like a working tool belt.

Using it for whipstitching, braiding and jewelry

The 1/8 inch width is a standard size that lines up with most lacing chisels and diamond punches sold for edge lacing, so holes punched with a matching chisel should feed the lace through cleanly. For whipstitch and single needle lacing this width sits comfortably in the hand, and the lace is thin enough to braid into cords for jewelry, bookmarks and drawstrings. Because deerskin takes dye evenly, the white color here can be left natural for a light finished look or dyed to match a specific project instead of buying a separate spool in every color. White does show handling dirt faster than a darker shade, so it suits items that will not see constant contact, or pieces meant to be dyed before use.

Trade-offs and how it compares with other lace

Against a flat cowhide lace like the 10 Yards Flat Genuine Leather Laces at 4mm, this deerskin round lace is thinner and softer but generally costs more per foot, and it is not intended for the same braided friendship bracelet style projects that flat cowhide lace suits. Compared with other deerskin cord spools on the market, the 50 foot length and 13 color range give more flexibility than shorter novelty spools aimed mainly at jewelry making. Deerskin lace is also not recommended for shoe or boot laces that see repeated flexing and ground contact, since thinner lacing wears through faster there than a purpose built shoelace leather.

Who should buy this spool

This lace fits crafters doing whipstitched edges on pouches and bags, Native style garment lacing, moccasin assembly, or leather jewelry and cord work where softness and a clean pull matter more than raw abrasion resistance. The white color is a good pick for anyone planning to dye lace to match several different projects rather than stocking a full rainbow of pre-colored spools. Buyers working on high wear items like belts, tool holsters or footwear that flexes constantly should look at a heavier latigo or kangaroo lace instead, since deerskin is built for softness and detail work rather than daily abrasion. For lighter lacing and stitching work, the length and width here cover most home projects.

Frequently asked questions