Jovitec Leather Strap Cutter, Strip and Strap Leather Wood DIY Craft Hand Cutting Tool Adjustable with 5 Blades Review (2026)

Who this strap cutter fits

This cutter fits a leatherworker who wants a simple, manual way to cut consistent width strips and straps for belts, bag handles or wallet straps without investing in a rotary or motorized strap cutter. The wooden body keeps the tool light and easy to store, and having 5 blades included from the start means a dull edge can be swapped out immediately rather than waiting on a separate blade order. It suits someone making straps regularly enough to benefit from an adjustable, repeatable width setting, but not someone cutting very high volumes where a bench mounted or motorized cutter would save more time.

How the adjustable fence works

The cutter uses an adjustable wooden fence to set the strap width, letting the same tool cut narrow lace as well as wider belt strap by moving the guide and locking it in place before pulling the leather through the blade. Based on listings for this style of cutter, the tool is generally built to handle a cutting thickness in the low millimeter range and strap widths up to around 4 inches, covering most belt and strap projects a hobbyist is likely to take on. Because the fence relies on a locking screw to hold its position, it needs to be checked and tightened before each cutting session for consistent results.

What the 5 included blades are for

Shipping with 5 blades means a crafter can rotate in a fresh edge as soon as cuts start to feel like they are dragging or tearing rather than slicing cleanly through the leather, which matters since a dull blade on a pull-through cutter tends to produce ragged rather than straight edges. Having spares on hand from the start also means there is no wait for a replacement blade order before finishing a project. As with any single edge blade, cutting quality depends on keeping the blade properly seated and tightened in its slot, not just on blade sharpness alone.

Where this cutter runs into limits

The main weak point reported for this style of tool is the fence itself: if the locking screw is not tightened firmly before each cut, the guide can creep slightly out of position partway through a long strap, leading to a strip that tapers rather than staying a consistent width. Very thick leather can also be difficult to pull through in a single smooth motion, sometimes requiring a couple of passes or extra hand pressure to get a clean cut all the way through. For light to medium weight leather and moderate strap widths, though, the tool performs the job it is built for.

How it compares in this guide

In this guide, Tandy's own natural wood strap cutter scores highest among the group, reflecting its established brand reputation for this exact tool category. This Jovitec cutter and Acogedor's very similarly built adjustable wooden cutter with 5 blades score identically, essentially offering the same core design and feature set from two different sellers. A GLOGLOW branded version scores just below, while a 3-blade BESTNULE cutter and another generic 5-blade wooden cutter round out the bottom of the group at a lower score, generally reflecting fewer included blades, a narrower adjustable range, or lighter overall construction that does not hold up as well to repeated strap cutting sessions.

Frequently asked questions