YKK #5 Metal Brass Closed Bottom Handbag/Craft Zippers - Ring Pull, Pick Color/Length (5 Zippers per Pack) Review (2026)

Who This Zipper Pack Fits

This listing covers YKK number 5 metal zippers with a closed bottom and a ring style pull, sold five to a pack in a single color and length that the buyer selects at checkout. The closed bottom design means the two sides of the zipper are joined at the base, so the slider cannot be removed and the tape does not separate into two halves the way an open ended jacket zipper does. That makes it a natural fit for bags, pouches, wallets, tool rolls and other leather goods where the zipper needs a fixed start and end point rather than a garment opening. Brass teeth pair well with vegetable tanned and oil tanned leather in tan, brown and black tones, since the warm metal tone matches natural leather hardware rather than standing out the way nickel or aluminum can. Buyers making a run of matching bags or wallets benefit from ordering multiple packs in the same color and length so every finished piece looks consistent.

Brass Construction and Sizing

The zipper uses number 5 metal teeth, a mid size commonly used on handbags, that measure about 5mm across the coil, with a tape trim of roughly 9/16 inch on each side of the teeth and a metal pull that runs about 1 inch long. YKK is the manufacturer behind the teeth and slider, a detail worth confirming since many closed bottom zippers sold for crafting use generic teeth with only the tape or packaging branded. These zippers are made in the United States according to the listing, which some buyers prefer for consistency between batches. Length is selected per pack, and the closed bottom means the finished tape length is fixed at the factory rather than trimmed and re-stopped by the buyer, so ordering the correct finished length for the project is important before checkout rather than after installation begins.

Sewing It Into a Project

Installing a closed bottom zipper into a leather bag or pouch typically means gluing or basting the tape to the leather edges before top stitching by hand or on a machine set up for heavier material, since standard zipper feet and light duty machines can struggle with thick veg tan or oil tanned hides. Leaving a small margin of tape past the stitch line helps the zipper open and close smoothly once the lining or facing is folded over the edge. Because the bottom is closed, there is no risk of the slider running off the end during use, which matters for pouches that get opened and closed often. Testing the zipper action before final assembly, sliding it open and shut a few times once basted in place, catches alignment problems while they are still easy to fix with a seam ripper.

Trade-offs Against Similar Options

Compared with the 9 inch YKK brass assortment also sold under this brand, which bundles several colors and uses an auto lock slider that resists creeping open under light pressure, this ring pull pack ships as five zippers in one chosen color without the auto lock feature, so buyers wanting an assortment for testing colors or a locking slider for bags that get tossed around should look at that listing instead. Against the six piece notch ring pull mix in seasonal colors, this listing gives less color variety per order but more consistency for a production run, since every zipper in a pack matches. None of these closed bottom options work for open garments like jackets or hoodies, where a separating zipper is required, so buyers should confirm the closed bottom format suits their pattern before ordering.

Bottom Line

Leatherworkers and bag makers who need matching brass zippers for pouches, clutches, wallets or tool rolls get dependable component quality here, provided they double check color and finished length before ordering since packs are not returnable once cut to length in most cases. Buyers who want to sample several colors before committing to a bulk order, or who need an auto locking slider for bags that see rough handling, are better served by an assorted multi color pack or the auto lock version from the same category. Anyone sewing an open garment rather than a bag should skip closed bottom zippers entirely and shop for a separating zipper instead, since this style cannot be adapted to that use.

Frequently asked questions